Whats about this technology?

[oiram]

SCALAR WARS
Broken Symmetry

For the open-minded reader, let me explain what broken symmetry means, and what the broken symmetry of a dipole means with respect to powering any dipolar EM circuit.

The strong prediction of broken symmetry by Lee and Yang and its experimental proof by Wu et al. in 1957, initiated a great revolution across physics and won a nearly instant Nobel Prize in December 1957 for Lee and Yang.

One of the broken symmetries proven by Wu et al. and published in 1957 is the broken symmetry of opposite charges, as on the ends of a dipole.

That asymmetry is used by charges and dipoles for extracting and pouring out Electromagnetic energy from the vacuum, yet not one current Electrical Engineering or classical electromagnetics textbook mentions the energy implications of dipolar asymmetry. Nor do they mention that every charge and dipole freely pours out real observable EM energy continuously, with no observable energy input.

Thus the textbooks implicitly assume that all EM fields, potentials, and energy are freely created out of nothing at all by their associated source charges.

Either the conservation of energy law is falsified, or the source charge must be receiving the necessary energy input in virtual state form from the active vacuum.

Broken symmetry essentially means that something virtual (shadowy, but real in a special sense and widely used in physics; it has real physical consequences, since it creates all the forces of nature) has become observable (real in the ordinary everyday sense that it can be detected, measured, observed, and used.). The broken symmetry of the end charges of a dipole rigorously means that, once the charges are forcibly separated to form that dipole, the dipole (its end charges) continuously absorbs virtual (fleeting) photons from the seething vacuum, coherently integrates these "photon pieces" into real observable photons, and re-emits the resulting real EM energy in the form of real observable photons in all directions at the speed of light.

That is not this author's work; that is particle physics as justified by the award of two Nobel Prizes. It isn't even in the electrical engineering model, so no objection based on standard classical EM and electrical engineering concepts has any validity at all.

That's why a dipolar permanent magnet, with opposite magnetic charges on its ends locked in there by the material itself, continuously exhibits magnetic field in the space surrounding it (out to the ends of the universe, if the magnet has been around long enough). There is a continuous and steady stream of EM energy, extracted directly from the vacuum and integrated into observable magnetic field energy, pouring forth from the dipolarity of that magnet. At any external point in that stream, the steady flow will give a steady or "static" reading for the magnetic field and thus for the intensity of the flow at that point.

Actually there is no such thing as a "static" field or potential in the universe; simply check out Whittaker's 1903 decomposition of the "electrostatic" scalar potential into bidirectional longitudinal EM waves, and his 1904 decomposition of any field and wave pattern into two such potentials comprised of bidirectional longitudinal EM waves. The 1904 paper founded what today is known as superpotential theory. The 1903 paper has been largely ignored by the academics, although it has been formidably weaponized by several nations, notably the Russians not long after WW II. Application of Whittaker's 1903 and 1904 papers is responsible for the weapons that then Secretary of Defense Cohen referred to in 1997.



EM ENERGY FROM THE VACUUM: TEN QUESTIONS WITH EXTENDED ANSWERS
T. E. Bearden
September 2000
1. How can we extract usable EM energy from the vacuum, anytime, any place in the universe,
and in any amount desired?
It's easy! And yes, it is pure magic in a sense, but it is a also a very rigorous kind of physics. It's a
pity that, since Heaviside discovered it in the 1880s, electrodynamicists have largely ignored and
arbitrarily discarded it from the energy flow theory for more than a century. They have ignored the broken
symmetry of a dipole—proven in particle physics for nearly a half century—in its vacuum flux exchange.
The classical electrodynamics model that is used to design and build electrical power systems does
not even include the vacuum interaction itself, much less a broken symmetry in the interaction between
the active vacuum and the dipole.
http://www.cheniere.org/techpapers/bearden5.pdf

http://www.cheniere.org/techpapers/on_the_principles_of_permissible.htm

http://forum.prisonplanet.com/

[oiram]

SPARKS posted a Aether Votex Unit in another thread. I did a search & found a site where they claimed working units:

http://dallastexas.net/PinkyAndTheBrain/archive/

The following is a SAMPLE EXCERPT of 1 of the posts from that URL SITE above. Does anyone know anything about this?


Here is a summary of the specs of my very crude duplication of Clifford Hazelton's free energy device. Two aluminum plate 6 inches in diameter and 4.25 inches apart. Alu plates are horizontal, flat. The plates are fed with a high voltage coil which puts out about 25 to 30 KV at one watt of power. That is very low power. It takes 15 minutes to charge a 25 KV capacitor bank that can be hooked to the supply.

For this experiment the capacitor bank was not connected. The HV supply has, as part of its construction, a HV fullwave diode bridge recitifier. The output from the bridge is connected directly to the Alu plates using jumper cords from Radio Shak. The HV supply was connected directly from the output of the bridge off the supply to the two plates. Luck would have it that I connected the right terminals to the top and bottom disk.

At this time I don't know whether top was + or minus. The torroid coil. I made it by taking a piece of 1/2 inch tubing, putting a dowell into it to make it rigid, and wrapped (very sloppy) a bunch of turns. I figure if it would work, sloppy was ok. I pulled the dowell out. Stuck a 2 inch piece of dowell into one end of the tube/coil and connected the other end into the other end of the coil. Voilla, a crude torroidal coil. Probably 75 turns of #28 wire on coil. The finished coil is similar to one of those SLINKY coil toys.

I put the coil into the aluminum disk sandwich on the bottom as that seemed to be where the wide end of the vortex would be from Cliff's discussion and the rolling ball experiment. Then connected a 1000 ohm resistor to each lead of the torroid coil using more jumpers. Hooked a voltmeter across the resistor with two more jumper to measure voltage. Actually tried two different loads, 1000 ohms and 165 ohms. Getting about 35 to 55 volts on the 1000 ohm and 70-109 volts on the 165 ohm.

http://www.overunity.com/4355/aether-vortex-tpu/

[pi3141]

Originally Posted by oiram

But did you noticed that the light-bulb is connected in one case twice to positive & in the other case twice to negative? Will the light-bulb work? All we do here is transferring different volumes (Water) (Volt) from one container to another & the flow in between gets utilised through a restriction (resistance = Light-bulb wire) (Pump) heating up the external environment; still no flowing particles should get lost?? ... IMO

Thank you.

I think the same, but there may be systems when the arrangement is not the case.

Perhaps in a non rechargeable battery, only the positive terminal might contain charges. The negative terminal could still attract the electrons to its side without transferring negatives back to positive.

Actually, lets get this straight -

The positive side of the battery is charged with negative electrons and so the negative side of the battery, must be a positive potential.

The charges in our batteries flow negative to positive.

If you think of the model of electrons moving one way in a circuit and the holes moving the otherway, it may be that the movement of the electons towards negative 'displace' the holes forcing them back towards the positive, in which case the energy released at the positive terminal by the first hole into the potential would be equal an opposite to the emf originally input by the electron leaving the positive terminal.

It would have to be.

In fact electrons flowing positive to negative and moving the holes back to the positive potential may be an explanation to back emf.

Thinking again about the model of the electrons moving one way, holes the other, I recently heard on a TV show that the electrons and holes when studied under a microscope don't actually move very far physically in the wire or circuit. They behave like those steel balls suspended on wire toys. But that toy nicely illustrates, whatever input energy is put in, will be transferred to the output and on the backward swing, (negative to positive, holes moving to positive potential) whatever energy is transferred back to the first steel ball will be transferred wih equal force to the end steel ball. Forward and backward motive force, the backward motive force bought into action by the input of the forward motive force. In the case of the steel balls there is a time delay between the intial power in and the reaction of the energy transferring back. I don't think that is the case with positive and negative energy flow.

The thing is with the lightbulb model, if you think about the relative size of the orbiting electron in a Tungsten filament atom, how does its orbital displacement effect the nucleus to release a photon. Its a long way a way and the electron is very small relative to the nucleus. There must be a medium between them.

Also, if flowing electrons do completely collide with orbiting electrons they are probably knocked out of the wire as heat. They still won't be destroyed, energy is never destroyed, so the charges themselves still exist but as heat which I think is infra red. So they are no longer constrained by the atomic structure of the wire. So if you take an Infrared thermometer, like the ones they use in garages and take the temperature of the lightbulb, then measure the light output and add the two together, you should get the total power out of the system.

The interesting thing about the lightbulb, is as it heats up it should increase its resistance, how come at some point the resistance is not so great it causes the electrons not to flow, breaking the electrical circuit and the lightbulb stop working until it cools down? If resistance does not increase to the point neccessary for that to happen, some electrons must make it through to the negative side.

But maybe they don't maybe once the circuit is flowing all the electrons input to the system are converted to infra red in the filament, as a consequence of all that knocking and friction, the photons are released by the nucleus at visible wavelength.

[pi3141]

Originally Posted by oiram

This should be your question right here!!!


Is it ignored or purposely dumped to ground by earth wiring!!

Yes!

I agree, that is exactly my thoughts to!

Lol. I will be reading the rest of your post but I'm working nights so a bit restricted for time.

Originally Posted by oiram

I think the so called professional monkey brains call it unwanted noise?? (Static cold vacuum electricity) ..... But why is it unwanted?

Again I agree!

Tap the noise floor for energy, the noise floor is created by the 'radiant' energy in the universe, atmospheric energy, schumann resonance, etc etc etc

Its still energy in our circuits.

My basic explanation of all this free energy stuff is either - tap the noise floor or use the back emf for work. Both will work to give you energy back.

[pi3141]

Originally Posted by oiram

66. The Savior said, "Show me the stone that the builders (scholars & Masons) rejected: that is the keystone."

39. The Savior said, "The Pharisees and the scholars have taken the keys of knowledge and have hidden them. They have not entered nor have they allowed those who want to enter to do so.

The stone as the foundation, the key as in knowledge. The rejected keystone is he rejected, actually surpressed theory.

The rejected theory being positive and negative equal and opposite. Ying and Yang.


We may all read the same books but some may read and interpret them differently to how we have been taught.

[oiram]

Originally Posted by pi3141

My basic explanation of all this free energy stuff is either - tap the noise floor or use the back emf for work. Both will work to give you energy back.

I would say your last comment brings as back exactly where Tesla left us with!

Tapping the floor in the literal sense of the word. >>> Tesla the genius!!

Tap the floor (ground Earth) a bit with frequency pulses & the earth will tap back to us either through the ground or (atmosphere Heaven)!

Earth is the negative charged plate & the atmosphere are the positive plate layers depending the elevation above ground you tap the positive & the tower is the Diode path connected to a capacitor to create usable energy!

http://www.reformation.org/tesla-wireless-transmission.html

So the Tesla tower with 50 meter hight should tapped the 5000 volt level??

If you would place the Tesla Dome on the top of the Pyramid in Egypt you would be in the tapping range of between 25,000 to 35,000 Volt !!

That's why this system with 2.5 meters = 250 Volt of the ground makes perfectly sense.
And with a reversed Tesla coil you invert the power to usable levels. But I'm not sure about there 25Kw statement in the image? .... well there should be some power & we do not know the frequency which could be high? I don't know the calculation??


http://frienergi.alternativkanalen.com

Atmospheric electricity

Cloud to ground Lightning in the global atmospheric electrical circuit. This is an example of plasma present at Earth's surface. Typically, lightning discharges 30,000 amperes, at up to 100 million volts, and emits light, radio waves, x-rays and even gamma rays .[1] Plasma temperatures in lightning can approach 28,000 kelvins and electron densities may exceed 1024/m3.

Atmospheric electricity is the regular diurnal variations of the Earth's atmospheric electromagnetic network or, more broadly, any planet's electrical system in its layer of gases. The Earth's surface, the atmosphere and the ionosphere, together are known as the global atmospheric electrical circuit. Atmospheric electricity is a multidisciplinary topic.

There is always free electricity in the air and in the clouds, which acts by induction on the earth and electromagnetic devices.[2] Experiments have shown that there is always free electricity in the atmosphere, which is sometimes negative and sometimes positive, but most generally positive, and the intensity of this free electricity is greater in the middle of the day than at morning or night and is greater in winter than in summer. In fine weather, the potential increases with altitude at about 30 volts per foot (100 V/m).[3]

The atmospheric medium, by which we are surrounded, contains not only combined electricity, like every other form of matter, but also a considerable quantity in a free and uncombined state; sometimes of one kind, sometimes of the other; but as a general rule it is always of an opposite kind to that of the Earth. Different layers, or strata, of the atmosphere, located at only small distances from each other, are frequently found to be in different electric states.[4] The phenomena of atmospheric electricity are of three kinds. There are the electrical phenomena of thunderstorms and there are the phenomena of continual electrification in the air.[5] The phenomena of the polar auroras constitute a third branch of the subject.[6]

Most authorities are agreed, however, that whatever may be the origin of free electricity in the atmosphere, the electricity of enormous voltages that disrupts the air and produces the phenomena of lightning is due to the condensation of the watery vapor forming the clouds; each minute drop, as it moves through the air, collects upon its surface a certain amount of free electricity. Then, as these tiny drops coalesce into larger drops, with a corresponding decrease in the relative surface exposed, the electric potential rises until it overcomes the resisting power of the air. This remark will be more clearly understood when it is considered that, with a given charge of electricity, an object's potential rises as the electrical capacity of the object holding the charge is decreased, which is the case when the minute drops coalesce into larger drops. The similarity of lightning to the electricity developed by an electrical machine was demonstrated by Franklin in his memorable kite experiments.[3]
https://en.wikipedia.org/wiki/Atmospheric_electricity



Lightning is electricity, but operates very differently from electrical discharges at the human scale. As lightning forms, it breaks through the air up to ten times easier than small-scale electric arcs, using tricks we don’t yet understand. The problem of understanding "lightning initiation" still confounds world experts in the field.

However, recent theories and a bizarre experimental accident suggest that laboratory-scale electric arcs start to gain lightning-like abilities once they grow past about 200ft in length.

Our goal is to build a machine that can generate arcs beyond this critical length, and find out what happens.



To accomplish this goal we plan to use two 10-story high Tesla Coils -- the largest ever built. At full output power [around four million watts] the coil towers will fill an area the size of a football field with a continuous display of electrical discharges. By carefully adjusting the drive voltage [up to 14 million volts] and the spacing of the towers, we intend to explore this mysterious region where normal electric arcs transform into lightning.

1:12 Scale Model Studying the dynamics of large twin coils

We’ve completed a fully functional 1:12 scale prototype for the Lightning Foundry, which we use to study the interactions between the two matched coils, and refine new design ideas. The prototype twin coils often surprise us with wonderfully unexpected behavior, including a strong tendency to couple power wirelessly over large distances. We studied this odd ability in detail, and published a paper on wireless power transfer at the 2008 North American Power Symposium.



The 1:12 scale prototype has already performed at several public events including Maker Faire, The Robert Randall Home for Decrepit Mariners, and also at the Integratron, sponsored by the UCLA Art|Sci Center.

Photo courtesy of Nick Bilton.
http://www.lod.org/Projects/LightningFoundry/LightningFoundry.html

Electricity from Orbit?
Martin I. Hoffert, Professor Emeritus of Physics and former Chair of the Department of Applied Science at New York University, discusses the cost-effective space solar power (SSP) -- the beaming abundant high-intensity solar power from space though atmospheric windows at laser or microwave frequencies for electric power at the surface and into a grid. The talk was released the past week as a part of the Google Tech Talks [video].

Dr. Hoffert's talk is based upon the Space-Based Solar Power As an Opportunity for Strategic Security by National Security Space Office Interim Assessment Phase 0 Architecture Feasibility Study, October 10, 2007 [Audio].

For more see the Space Power Association.
http://spaceports.blogspot.com/2007/12/electricity-from-orbit.html

[oiram]

Maybe its just me!

I don't know why; but I see something totally different in all these images!

Maybe Tesla did too?

What better way to make these images part of traditions & religion so they do not get lost.

[pi3141]

Originally Posted by oiram

Maybe its just me!

I don't know why; but I see something totally different in all these images!

Maybe Tesla did too?

What better way to make these images part of traditions & religion so they do not get lost.

I agree.

Here's another example from Code144 and the Ed Leedskalnin mystery.

The cover of one of Ed Leedskalnin books -

A nice diagram of the idea (not mine) -

You connect an LED between the coils and the magnetic current circulating in the magnet due to the 'keeper' is inducted into the coils and burnt off in the LED. But since the magnetic flux is not actually created by the magnet, whenever a bit is lost, the magnet conducts more magnetic energy. You should have energy freely until the magnet looses its magnetic property.

[oiram]

This force he called the Cosmic Force. The ancient's called it the "Flower of life" or the "Golden Section," and again it is Sacred Geometry. Ed's code reveals this science to be the understanding all of natures forces and creations. From a nano level up to the structure of our universe itself.
This simple clue Ed Leedskalnin left on the cover of his book Magnetic Current is the key to opening the most sought after mystery of the world. Two Individual Magnetic Currents that form all of nature!! They are the Blueprints of all Creation.
Simplicity in these two currents will blossom into glorious complexity that becomes a blueprint of our universe and it's base form of energy, and how it's very elastic magnetic current tentacles stretch out in vortex motions, it is the construction and destruction process within the fabric of creation.

Science says energy is canceled when Positive and Negative connect, but Ed said there is still something there when the electric is not. Ed Leedskalnin said that science is misled by this false electron principle. He said there are no electrons and the false conclusion came about by giving the cathode in a vacuum tube a double dose of negative, from an unbalanced power source that was used by Thomson. Ed said it should have been given an equal amount of positive and negative running Positive electricity against Negative electricity. Ed Leedskalnin said the electron theories are wrong and have misled millions of people from the truth. Ed Leedskalnin also mentions the instruments for measuring are all one sided. Ed Leedskalnin wanted to call it magnetricity and he would then accept it. His understanding was of two individual magnetic currents of equal force, North & South pole magnets and the Neutral particles of matter. He said they can ONLY run if North and South pole magnets are whirling against each other and they run in a screw like right hand twisting motion
(vortex motion). Ed Leedskalnin wrote in his book Magnetic Current: "Today , Yesterdays sunlight are Neutral the particles of matter."


Development or growth in all of nature is by means of magnetic centrifugal forces of Two individual magnetic currents and the neutral particles of matter. The vortex motions are throwing out North & South individual magnets, the magnets that are lost are instantly replaced. For all that was lost was gained back instantly. North and South come back to there own kind of magnet pushing it's same kind of magnet continuing the orbits movements, rejoining the individual perpetual orbits. The metal is not the magnet substance, it is just holding more magnets flowing through it then other things. We are contained in the Earths magnetic field. Magnetic currents flow through metal easier then the air.
Magnetic energy flows through each and everything here on earth, but each and everything allows different amounts of it and reacts differently due to the interactions and resistance of the magnets which make up that matter. All matter is held together by atoms and all atoms are held together by two individual magnetic currents. Ed tells us atoms should be constructed as the Earth , with 2 separate magnetic poles. Two magnetic currents are the fabric of what is holding together everything in our universe including the ATOMS themselves, this is what builds and holds an Atom into a structure. The Ancients knew this fantastic secret as did Ed Leedskalnin and there is a ton of evidence.

The message here to not be ignored is Ed Leedskalnin had amazing insight and has given us the true meaning of Sacred Geometry and that it is a representation of two magnetic currents. And he left us the visual message before he died. Some people don't seem interested in this discovery, this still baffles me, I see it as a new/ancient door opening for exciting possibilities of investigation and at the same time also ties together many existing theories and conclusions with many researchers in history and at present.

If you look close, when observing the broken code illustrations at my website, you will see the tubes that connect each center, this seems to be what these magnetic structures of nature use to distribute the energies within themselves and beyond. When these magnetic structures connect to other magnetic formations, they attach into a whole network linking all the centers to each other forming grid like patterns that seem to unite all into one unit.

Once the code patterns have developed into a whole structures and then merging them as a circuit (every connection made) attached to another circuit you will see more doors open to Ed's secret knowledge of energy in it's truest form. The underlying grid pattern begins to form. This is built into the structure of Ed's brilliant code. Ed Leedskalnin seems to have had a complete Ley Line understanding. It goes way beyond our modern understanding.

The connections between Science and Religions of all cultures are made with this discovery. There are only three things the whole universe needs to have for all of it's majesty. North-pole magnets & South-pole magnets and they are orbiting Neutral particles of matter: North-pole / 0 / South-pole
It is the substance of creation and of life itself. It is alive and It never dies.

Now I will tell you to take a good look at what is thought to be a simple AC generator that Ed Leedskalnin built. It is so much more then anyone is realizing. It is a brilliant design from a brilliant man, a machine that compliments an understanding of natures energy at it's very BASE. Ed's understanding of the base of everything in creation is unsurpassed in modern history. So scientists and researchers should examine the magnetic wheel of Ed Leedskalnin with a more open mind.
http://www.world-mysteries.com/coralcastle.htm

[oiram]

WOW just found a super side right here!

Hah this is nice look! >>> When I get the time I have to contact the good Man = Rudolf Bosnjak
I must got the original paining image from his first side; which is not available any-more! >>> Maybe as he said his side got hacked by someone??

OTHER PEOPLE ABOUT MY WORK
BEGINNING OF OIRAM THINKING
I found my images and my explanation of my work from stolen and hacked web site www.sarajevo.net on David Icke web site,
This man understands a LOT... http://www.davidicke.com/forum/showthread.php?t=146750

Everything what is user with the name oiram written with the background in gray color and gives oiram opinion ... but Rudolf Boschnjak has released information to see how many other brains of this planet Earth has the power to think ... the Rudolf Bosnjak way.

Oiram is one of them, I hope the there is more as he is, so let him come forward contact is here
http://www.elektroauto.ba/NT/drugi_mom_radu.html

http://www.elektroauto.ba/NT/index.html



http://www.elektroauto.ba/NT/index.html

[pi3141]

Originally Posted by oiram

http://www.elektroauto.ba/NT/index.html

Bravo Tesla.

Excellent, I hadn't seen that thanks.


So you have a small petrol fired steam turbine driving one or two electric motors set up as generators, output being bufferred by a couple of batteries and connected via controller to one or two electric motors driving the propshaft of a vehicle, either directly or through an auto gearbox.

Your input fuel is water and petrol/parrafin/local waste combustant.

That should be a failry lightweight EV with few batteries and mulitple fuel sources and no long recharge periods!


Another way would be an alternator or two being driven by steam turbine and a bank of batteries to give, say 50 mile range. The alternator would constantly be topping up the bank, batteries providing short on demand power, but running mostly on alternators at steady rpm periods. Still need to recharge batteries occasionally, but would be an effective range extender.

[octopus]

I don't know if it has been mentioned here before, but also at Coral Castle the construction method has been depicted in the interior designs.

Here's a video about it, the part with the painted codes starts at 22:30

http://www.youtube.com/watch?v=93v6rGjxb5U&feature=related

http://www.youtube.com/watch?v=93v6rGjxb5U&feature=related

[oiram]

Radiant Energy Patent

When thinking about the 1900 turn-of-the-century you don't think of high-tech but Nikola Tesla certainly was one of the geniuses of the century. One of the most interesting patents I found was US patent number 685,958 (.PDF) for a Method of Using Radiant Energy.

If you look closely at the original patent drawing below you can see someone hand wrote: "electric stepping motor energized by corpuscular energy from the sun." Was this the precursor of the Solar Panel?

This reminds me of how in 1880 Alexander Graham Bell invented the photophone-transmission of sound on a beam of light- a precursor of today's optical fiber systems.

Inventor Bio

Born in Smiljan Lika, Croatia, the son of a Serbian Orthodox clergyman, Tesla attended Joanneum, a polytechnic school in Graz and the University of Prague for two years. He started work in the engineering department of the Austrian telegraph system then became an electrical engineer at an electric power company in Budapest and later at another in Strasbourg.

While in technical school, Tesla became convinced that commutators were unnecessary on motors; and while with the power company he built a crude motor which demonstrated the truth of his theory. In 1884, Tesla came to the United States and joined the

Edison Machine-Works - 1881 | Flickr - Photo Sharing!

Edison Machine-Works - 1881 | Flickr - Photo Sharing!

Works as a dynamo designer.

Telsa obtained more than 100 patents in his lifetime. Despite his 700 inventions Tesla was not wealthy. For many years he worked in his room at the Hotel New Yorker, where he died.

http://www.lotempiolaw.com/2011/01/articles/inventors/inventors-hall-of-fame-nikola-tesla/

[oiram]

Thanks to Mr. Rudolf Bosnjak I ended up with the information where this image originated!

But who is able to translate the text below the image? ... Who knows maybe a important message?

He also has a collection of other images on his page..... very interesting for some more research.

http://www.elektroauto.ba/CADDY/modifications.html


SINAKSARION SINAXARION_1670_ year
http://www.elektroauto.ba/NT/tetraevangelion/cetverojevandjelje.html

This is what I ended up with after researching into the Image!


http://forum.davidicke.com/showthread.php?p=1060696722#post1060696722

TetraevangelION >>> http://www.elektroauto.ba/NT/tetraevangelion/cetverojevandjelje.html

Sava >>> http://www.elektroauto.ba/NT/tetraevangelion/index_sava.html

CrucifixION >>> http://www.elektroauto.ba/NT/tetraevangelion/raspece.html

VasION >>> http://www.elektroauto.ba/NT/tetraevangelion/VASION.html

THIS IS FIRST RUDOLF B. ELECTRIC CAR >>> http://www.elektroauto.ba/CADDY/modifications.html

NIKOLA TESLA INDEX >>> http://www.elektroauto.ba/NT/index.html#human being lacks knowledge

His Index page: >>> http://www.elektroauto.ba/NT/tetraevangelion/index.html

WORK ON WIRELESS POWER TRANSMISSION
FOR THE ELECTRIC CARS
http://www.elektroauto.ba/NT/indexE_WIPOELTRAS.html

http://www.elektroauto.ba/NT/PISMA/nikola_tesla_transmission_to_electric_car.html

[oiram]

Originally Posted by oiram

From Topic:
Dimensions

Something which may comes handy one day?


Nice testing equipment! >>> images have link connection....

Introduction to GyroTorque™ Technology

GyroTorque is a new type of continuously variable transmission (CTV) based on gyroscopic reaction. GyroTorque is capable of large speed ratios, without the need to utilise gears for generating electricity from wind and wave power resources.

The infinitely variable nature of GyroTorque means that more power from wind, wave and tidal resources can be captured and controlled to generate electricity at reduced costs.

By not transmitting the peaks and troughs of wind gusts GyroTorque avoids severe mechanical and electrical loading from the turbine onto other parts of the system including the generator.


Other unique features of GyroTorque:
Ability to operate over a full speed range (i.e. zero to full speed) at high efficiency/minimal losses.
Ability to decouple and control the transmission with minimal effort for maintenance purposes and variable operation.
Ability to operate multiple GyroTorque units in parallel as required to achieve high transmission capacity.

Understanding GyroTorque™ Technology
Variable transmissions can be classified into two types - Static and Kinetic.

In the static type the input torque is transmitted to the output by a ratio called a speed ratio - gear ratio, meaning that input is directly linked to the output via some form of physical constraint such as gears or belts.

In the kinetic type this does not occur; rather power transmission torque is generated within the transmission. This means that the input and output can move independently of each other with no physical constraint.

GyroTorque belongs to kinetic type. The only other well known kinetic type of transmission is the Torque Converter. Unlike GyroTorque, Torque Converters are inefficient except in a narrow speed range.

Static variable type transmissions are not suitable for wind power generation for a number of reasons that include:
http://www.gyroenergy.co.nz/gyrotorque.html

Roll stabilization inside the hull

Gyros for stability
Elmer Sperry designed a gyrocompass in 1908 and then applied the gyroscopic principle to the challenge of stabilizing a ship. The unavailability of practical servo amplifiers made it necessary for Sperry to take a direct (brute force) approach in using a gyro to control the roll of a vessel. His first large-scale system, comprised of two gyro wheels having a total mass of some 60 tons was installed in a new U.S. Army troop ship, USS Henderson in 1917. The Sperry Gyroscope Company continued to develop similar direct-acting stabilizing gyros culminating in some truly massive triple-rotor installations such as the 650-ton system installed in the Italian liner Conti di Savoia in 1932.

A 10,000-rpm rotor
The gyro wheel in the Seakeeper system is housed in a partial vacuum in a spherical container. The sealed sphere is designed to minimize windage loads that result from its 10,000-rpm speed and to ensure that the bearings are well protected from the marine environment. The system’s power drain is about 3 kw during the approximately 45 minutes it takes for the rotor to reach full speed, at which time the power demand decreases to about 1.5 to 2.0 kw. A genset will be needed to keep the gyro operating when underway or while anchored; shore power can be used at a dock. The manufacturer reports that the operating noise level is modest but recommends that it be installed in the engine room or in a suitably sound-shielded space. The gyro can be located virtually anywhere in a vessel, but not forward in a high-speed boat.

As effective as these systems are, roll stability, whether achieved with active, servo-controlled fins or a gyro, does not come cheaply. Either system will likely cost about $50,000 installed (the gyro will likely cost more than a fin system’s components but will be less expensive to install and maintain).
http://www.oceannavigator.com/content/roll-stabilization-inside-hull

PDF file: http://www.ipenz.org.nz/ipenz/forms/pdfs/trenz7.pdf

Control Moment Gyroscope

Price: £1,499.99
What is the weight/rpm of each CMG rotor?
The brass disk is 111g, rpm is about 12,000rpm.
http://www.gyroscope.com/d.asp?product=CMG

Large Image here:
Price: £71.48
(click on the images above to view movie)
http://www.gyroscope.com/d.asp?product=SUPER2

Vortex Tube

Price: £102.12
http://www.gyroscope.com/d.asp?product=VORTEXTUBE2

TESLA TURBINE
Large Image here:
Price: £214.45
(click on the images above to view movie)
Output : 60 watts @ 10.5 VAC @ 25,000 RPM
type : 3 phase AC
MAX Output : 150 watts
http://www.gyroscope.com/d.asp?product=TESLATURBINE2#

SmartSPIN X2 TECHNOLOGY
EXPLORING INERTIAL PROPULSION USING GYROSCOPIC MOTION


http://www.intalek.com/Index/Project...X1_Diagram.jpg
http://www.intalek.com/Index/Projects/SmartSPIN_X2/SmartSPIN_X2.htm

[oiram]

What's about this Idea? Tesla oiram Labyrinth .....

So by my logic the rotating Labyrinth disks with a added magnet creates high Amps + a only small Tesla coil pulse hitting the Labyrinth disks which adds high Voltage .... Yes/No/maybe?? ... 1 + 1 = 2





http://forum.davidicke.com/showpost.php?p=1060698927&postcount=38


This also joints into this theory .... may even add a magnet to the rotating Labyrinth??

Bottom left if the info is correct creates one plate around ~0.9 Volt 1000 Amps = 10 disks 9 volt/1000 Amps.


http://forum.davidicke.com/showpost.php?p=1060696907&postcount=28

[pi3141]

Vindication?

Originally Posted by pi3141

Think of a car travelling at 50 mph, it only takes a few horsepower to maintain that speed, but it took more energy to build it up to speed. It takes a huge amount of energy to bring it to an imeadiate dead stop. So on a motorway, flat road, no headwind, accelerator power on then cut power, coast until you slow a bit, then accelerator power on for a bit, then coast again. I've heard it called 'pulse driving' ?? You can apparently increase your mpg. Under the right conditions, it makes sense, tapping back the momemtum on a long journey could increase your expected mpg.

Incredible video of the eco-car that manages 584 miles to the gallon

It’s powered by a modified Honda generator and can hit 12mph flat out. Its low fuel consumption is partly achieved by coasting.

Read more: http://www.dailymail.co.uk/sciencete...#ixzz1s1LSm5SK

In other words, tapping back some of the energy stored as momentum.

[christ4life]

Technology complicates your life, and takes away your freedom.

[xxein2]

someone will always profit somewhere. Nothing is ever free. I have read they have fusion power but in all honesty.. why would a power company put themselves out of business. I can assure you thats not good business.

Its the same as solar panels. they get up to 30% efficiency. If they reached 80% efficiency all other power sources would be null and void. Somewhere someone might have reached that efficiency but he would be very quickly silenced.

Its not just the money the company makes you also have to think about all the jobs that would be lost under these means. You might only have to pay 1$ a year for electricity but the all might government would lose millions of dollars in tax revenue.

[posidon]

Does any one know were can i find a good online store that sell neodymium magnets, and send them outside U.K.?
I want buy a few and start testing few personal theories.

Thanks