what the f

[whitenight639]

Hey,
below is a very convincing video of a device not much bigger
than a mini pizza that is shown to light a 100watt lightbulb.
there has been a couple of sucessfull(ish) replications and it looks promising.
and for all you free energy skeptics yes stephen marks has been slandered and been through court,
but can you find a free energy inventor that hasn't?
videos- (video 1 and 2 are long video 4 is only 5 mins ).

http://video.google.com/videoplay?docid=167210479374903373&q=steven+mark

http://video.google.com/videoplay?docid=-1944827568401901581&q=steven+mark

http://video.google.com/videoplay?docid=-8435800732540412467&q=steven+mark

http://video.google.com/videoplay?docid=333661567309752927&q=steven+mark

http://video.google.com/videoplay?docid=-5483558279656482347&q=steven+mark

[whitenight639]

forum discussion that produces a successfull(ish) replication;
http://www.overunity.com/index.php/topic,2535.0/topicseen.html

yahoo group working to produce more replications:
http://tech.groups.yahoo.com/group/MarksToroid/

correspondence with mark with hints over his design (he dosnt disclose everything as i
believe he sold the technology but does provide lots of info on his theory of how it works etc)
http://www.thewaterengine.com/pdf/stevenmarktpu.pdf

a video of a sucessfull replication or a replication by Jason O
(Otto and Roberto were the first people to replicate it apparently);
http://video.google.com/videoplay?docid=-1589323258906115584

a PDF document by otto on there replication alot more detailed.
http://www.intalek.com/Index/Projects/Research/otto_ronette_TPU_ECD-V1_0.pdf

[whitenight639]

Fatal error: Cannot redeclare goldbrick_hook_google_complete() in /home/admin2/icke_html/forum/goldbrick/includes/sites/google.php on line 33


obviously too many links, but thats fucking annoying spent ages on that post then had to re find all the links. :mad:

[penguin]

whitenight639

The reason I showed you that diagram is because it is tesla's design.
It is still a good find :)


Jack also says that no patent was ever filed on Steven’s device and so long has now elapsed since public disclosure of the device, that it can no longer be patented. All the components were bought from Radio Shack, the shape is supposedly not important and was just made as a toroid because it was easy to wind that shape. He also says that it, and all replication attempts, get warm after a couple of minutes of use, but nineteen to twenty minutes into the operation, exponential thermal runaway takes place, causing the device to shut down completely. He also says that the device vibrated when in use although it contained no moving parts and there was no electronic circuitry used. Please remember that I am unsure of the reliability of these additional comments.

Here is the Tesla patent mentioned, and which is being examined in detail on Stefan Hartmann’s overunity.com forum mentioned above:



US PATENT 381,970 SYSTEM OF ELECTRICAL DISTRIBUTION May 1, 1888


To all whom it may concern:
Be it known that I, NIKOLA TESLA, from Smiljan Lika, border country of Austria-Hungary, now residing at New York, in the county and State of New York, have invented new and useful Improvements in Systems of Electrical Distribution, of which the following is a specification, reference being had to the drawings accompanying and forming a part of the same.

This invention relates to those systems of electrical distribution in which a current from a single source of supply in a main or transmitting circuit is caused to induce by means of suitable induction apparatus, a current or currents in an independent working circuit or circuits.

The main objects of the invention are the same as have heretofore been obtained by the use of these systems, that is, to divide the current from a single source, whereby a number of lamps, motors, or other translating devices, may be independently controlled and operated by the same source of current, and in some cases, to reduce a current of high potential in the main circuit to one of greater quantity and lower potential in the independent consumption or working circuit or circuits.

The general character of the devices employed in these systems is now well understood. An alternating-current magneto-machine is used as the source of supply. The current developed thereby is conducted through a transmission circuit to one or more distant points at which the transformers are located. These consist of induction-machines of various kinds. In some cases, ordinary forms of induction-coil have been used with coil in the transmitting-circuit and the other in a local, or consumption circuit, the coils being differently proportioned according to the work to be done in the consumption-circuit – that is to say, if the work requires a current of higher potential than that in the transmission-circuit, the secondary or induced coil is of greater length and resistance than the primary, while, on the other hand, if a quantity current of lower potential is wanted, the longer coil is made the primary.

In lieu of these devices, various forms of electro-dynamic induction-machines, including the combined motors and generators, have been devised. For instance, a motor is constructed in accordance with well-understood principles, and on the same armature are wound induced coils which constitute a generator. The motor-coils are generally of fine wire and the generator-coils of coarser wire, so as to produce a current of greater quantity and lower potential than the line-current, which is of relatively high potential, to avoid loss in long transmission. A similar arrangement is to wind coils corresponding to those described in a ring or similar core and by means of a commutator of suitable kind to direct the current through the inducing-coils successively, so as to maintain a movement of the poles of the core and of the lines of force which set up the currents in the induced coils.

Without enumerating the objections to these systems in detail, it will suffice to say that the theory or the principle of the action or operation of these devices has apparently been so little understood that their proper construction and use have, up to the present time, been attended with various difficulties and great expense. The transformers are very liable to be injured and burned out, and the means resorted to for curing this and other defects have almost invariably been at the expense of efficiency.

The form of converter or transformer which I have devised, appears to be largely free from the defects and objections to which I have alluded. While I do not herein advance any theory as to its mode of operation, I would state that, insofar as the principle of construction is concerned, it is analogous to those transformers which I have above described as electro-dynamic induction-machines, except that it involves no moving parts whatever, and is hence not liable to wear or other derangement, and requires no more attention than the other and more common induction machines.

In carrying out my invention, I provide a series of inducing-coils and corresponding induced-coils, which by preference, I wind upon a core closed upon itself – such as an annulus or ring subdivided in the usual manner. The two sets of cols are wound side by side or superposed or otherwise placed in well-known ways to bring them into the most effective relations to one another and to the core.

The inducing or primary coils wound on the core, are divided into pairs or sets by the proper electrical connections, so that while the coils of one pair or set to co-operate in fixing the magnetic poles of the core at two given diametrically-opposite points, the cols of the other pair or set – assuming, for sake of illustration, that there are only two – tend to fix the poles ninety degrees from such points. With this induction device I use an alternating-current generator with cols or sets of coils to correspond with those of the converter, and by means of suitable conductors, I connect up in independent circuits the corresponding coils of the generator and converter.

It results from this that the different electrical phases in the generator are attended by corresponding magnetic changes in the converter; or, in other words, that as the generator-coils revolve the points of greatest magnetic intensity in the converter will be progressively shifted or whirled around. This principle I have applied under variously-modified conditions to the operation of electro-magnetic motors, and in previous applications, notably in those having Serial Nos. 252,132 and 256,561, I have described in detail the manner of constructing and using such motors. In the present application, my object is to describe the best and most convenient manner of which I am at present aware of carrying out the invention as applied to a system of electrical distribution; but one skilled in the art will readily understand from the description by the modifications proposed in said applications, wherein the form of both the generator and converter in the present case can be modified.

In illustration therefore of the details of construction which my present invention involves, I now refer to the accompanying drawings.


http://www.free-energy-info.co.uk/Ch5/Fig31B.gif

http://www.free-energy-info.co.uk/Ch5/Fig31C.gif

http://www.free-energy-info.co.uk/Ch5/Fig31D.gif

http://www.free-energy-info.co.uk/Chapt5.html

[whitenight639]

Jack also says that no patent was ever filed on Steven’s device and so long has now elapsed since public disclosure of the device, that it can no longer be patented. All the components were bought from Radio Shack, the shape is supposedly not important and was just made as a toroid because it was easy to wind that shape. He also says that it, and all replication attempts, get warm after a couple of minutes of use, but nineteen to twenty minutes into the operation, exponential thermal runaway takes place, causing the device to shut down completely. He also says that the device vibrated when in use although it contained no moving parts and there was no electronic circuitry used. Please remember that I am unsure of the reliability of these additional comments.


thats awesome if i make a big one then i could power my house, and keep it cooled in oil or water if its sealed and heat my house aswell :) (even exiting transformers used in on the national grid are submersed in oil so its not a new problem).

or have a bank of them so that one is never on for long and they alternate.

there are videos of the TPU singing (vibrating) on youtube just like a speaker this dosn't sound desirable for the application i had in mind.

thanks for the tesla patent it is very similar i will look into it.